Source identification, contamination status and health risk assessment of heavy metals from road dusts in Dhaka, Bangladesh

In this study, concentrations of Cr, Mn, Ni, Cu, Zn, Cd and Pb were determined in road dusts collected from different locations in Dhaka to assess source, contamination status and health risk. Energy-dispersive X-ray fluorescence spectroscopy and energy-dispersive X-ray spectroscopy were used to determine Cr, Mn, Ni, Cu, Zn, Cd and Pb and their mean concentrations were 162.27 ± 29.46, 721.18 ± 180.14, 35.65 ± 12.55, 104.56 ± 128.33, 515.32 ± 321.90, BDL, and 342.82 ± 591.20 mg/kg, respectively. Among the heavy metals, highest concentrations of Cu, Zn and Pb were found at urban sites-7 (municipal waste dumping) and 8 (medical waste incineration). Highest concentration of Cr followed by Cu and Zn was found at site-5 (Tejgaon, urban). Principal component analysis revealed that anthropogenic activities are the potential sources for Cr, Ni, Cu, Zn and Pb while earth crust for Mn. Pollution index and pollution load index results suggested that all the sites were contaminated and/or degraded by Cr, Cu, Zn and Pb except sites-9 (urban), 10 (sub-urban), 11 (rural) while sites-7 and 8 (urban) were extremely degraded. For noncarcinogenic health risk, hazard quotient values for dermal were higher compared to that of inhalation/ingestion. Though hazard index values were less than 1 at all the sites, these were at least one order of magnitude higher for children group than that of adult group, thus the children group may face more noncarcinogenic health risk at sites-7 and 8. Values of incremental lifetime cancer risk were from 10⁻⁹ to 10⁻¹¹ showed no carcinogenic health risk by road dusts contaminated with the heavy metals.     

Water distribution system failure: a framework for forensic analysis

The main purpose of a water distribution system (WDS) is to deliver safe water of desirable quality, quantity and continuity to consumers. However, in many cases, a WDS fails to fulfill its goal owing to structural and associated hydraulic failures and/or water quality failures. The impact of these failures can be reduced significantly if preventive actions are taken based on their potential of occurrences or if a failure occurs and is detected within a minimum period of time after its occurrence. The aim of this research was to develop a forensic system for WDS failures. As part of the proposed forensic analysis, a framework has been developed, which investigates structural and associated hydraulic failures as well as water quality failures and integrates all failure investigation under a single platform. Under this framework, four different models have been developed to evaluate and identify structural and associated hydraulic failures and water quality failures. If a failure is detected in the system, the framework is capable of identifying the most probable location of the failure. To investigate the effectiveness of the proposed framework, the developed models have been tested and implemented in different WDSs.     

Preconcentration of metal ions through chelation on a synthesized resin containing O, O donor atoms for quantitative analysis of environmental and biological samples

Nascent Amberlite XAD-4 has been used as the polymeric support for the synthesis of a stable extractor of metal ions, by incorporating phthalic acid through azo bridging. Elemental analyses and infra-red spectral and thermal studies were carried out for its characterization. The water regain value and hydrogen ion capacity were found to be 12.50 and 5.75 mmol g^?1, respectively. The optimum pH range for the maximum sorption of Ni(II), Mn(II), Cu(II), Zn(II), Cd(II), Cr(III), and Co(II) was observed at pH 5.5–8.0 with the corresponding half-loading time (t _1/2) of 9, 5, 9, 9, 3, 9, and 5 min, respectively. The preconcentration factor for Ni(II), Mn(II), Cu(II), Zn(II), Cd(II), Cr(III), and Co(II) are 190, 190, 190, 180, 180, 160, and 160, with the corresponding limit of preconcentration in the range of 5.25–6.25 μg L^?1. The detection limits, for flame atomic absorption spectrophotometry, were found to be 0.62, 0.60, 0.65, 0.75, 0.72, 0.84, and 0.85 μg L^?1, respectively. Method has been successfully applied to the analysis of water samples, multivitamin formulations, infant food substitutes, hydrogenated oil, and fishes.     

Spatial variability of arsenic concentration in soils and plants, and its relationship with iron, manganese and phosphorus

Spatial distribution of arsenic (As) concentrations of irrigation water, soil and plant (rice) in a shallow tube-well (STW) command area (8 ha), and their relationship with Fe, Mn and P were studied. Arsenic concentrations of water in the 110 m long irrigation channel clearly decreased with distance from the STW point, the range being 68-136 μg L⁻¹. Such decreasing trend was also noticed with Fe and P concentrations, but the trend for Mn concentrations was not remarkable. Concerning soil As, the concentration showed a decreasing tendency with distance from the pump. The NH₄-oxalate extractable As contributed 36% of total As and this amount of As was associated with poorly crystalline Fe-oxides. Furthermore only 22% of total As was phosphate extractable so that most of the As was tightly retained by soil constituents and was not readily exchangeable by phosphate. Soil As (both total and extractable As) was significantly and positively correlated with rice grain As (0.296 ± 0.063 μg g⁻¹, n = 56). Next to drinking water, rice could be a potential source of As exposure of the people living in the As affected areas of Bangladesh.     

Thermal venting to recover less-volatile hydrocarbons from the unsaturated zone, 1. Theory

Thermal venting is a remediation technique suitable to the liquid unsaturated zone to enhance recovery of less-volatile residual hydrocarbon contaminants. Thermal venting is different to traditional soil venting because heated air instead of air at ambient conditions is applied to the contaminated zone. The vapor pressure of a less-volatile contaminants is typically increased by temperature causing the gas-phase concentrations to increase by three- to five-fold over a temperature increase of 20–30°C. The work described in this first paper provides the theoretical framework of analysis related to thermal venting. The analysis included nonisothermal gas flow, thermal energy transport and multicomponent mass transport in a multiphase porous medium. The transient gas flow analysis included the effect of temperature on fluid properties and gas compressibility. The heat energy transport analysis was performed under the thermodynamic equilibrium condition with phase-summed effective thermal properties. Multi-component mass transport was performed under local equilibrium for partitioning between phases. Model verification was performed to the extend possible using analytical and available experimental data for different physical processes. The second paper of this two-part series will demonstrate the applicability of thermal venting technique through numerical simulations of hypothetical laboratory and field-scale scenarios.     

Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

Managing mangroves in Bangladesh: A strategy analysis

Bangladesh, favoured by a tropical climate, houses the world’s largest stretch of mangroves forests (Sundarbans Reserved Forest) and plantations. Around half of the forests of the country occur in the coastal zone. People extract various goods and services from the mangroves. Nevertheless the mangrove forests are depleting. Although the extent of the Sundarbans forest has not changed much, its decline is of a qualitative nature. Mangrove plantations are increasing in area but they are losing growing stock. To arrest this, Bangladesh has adopted several strategies. The ‘Sustainable Ecosystem Management’ strategy has now been adopted instead of the ‘Sustained Yield Principle’. Biodiversity conservation and enhancement has been taken as a key management goal. A zoning system is being developed for both production and protection purposes. The government facilitates alternative income for the local people by generating activities for the communities which are dependent on the forest. Different non-governmental organizations collaborate with the government in reducing the local people’s dependence on the forest. Coastal plantations are erected to protect people from cyclones and to make the land more suitable for habitation. Through this greening of the coastal belt tree plantation is encouraged in coastal villages. Coastal embankments are being planted and leased to poor settlers in exchange for routine maintenance of the embankments. Plantations on newly accreted mud flats help in stabilizing the land, which can later on be settled by victims of erosion elsewhere. These adopted management measures do not only contribute to forestry resource management but also to the social, environmental and economic wellbeing of the coastal communities. These efforts are at present being integrated into an Integrated Coastal Zone Management (ICZM) project.     

Seasonal occurrence of the yellow stem borer Scirpophaga incertulas (Walker) on deepwater rice in Bangladesh and Thailand

Deepwater rice is grown in South and Southeast Asia on 11 million hectares flooded deeply during the monsoon. Surveys for the incidence of stem borers in deepwater rice in Bangladesh from 1977 to 1980, and in Thailand during 1981 and 1982, showed that borer incidence and species composition were remarkably similar. Scirpophaga incertulas (Walker) usually comprised more than 90% of the borer population and was almost exclusively present during the main flooding period. Chilo polychrysus (Meyr.) comprised 11% and Sesamia inferens (Walker) 6% of the population in the pre-flood and ripening stages.Low borer activity in the early part of the season was explained by a low nucleus population, the synchronous planting of deepwater rice, and severe moisture stress and high temperatures in the pre-flood period. In Bangladesh, a severe drought in 1979 limited Scirpophaga incertulas populations to unusually low levels until the flowering stage. In Thailand, drier conditions, the lack of an intervening rice crop in the dry season and a longer pre-flood period, appeared to severely restrict early season borer activity. The onset of flooding and stem elongation provided a more favourable environment for S. incertulas. Borer activity increased steadily during the first 3–4 months of flooding, to average 23% damaged stems (26 m^?2) and 13 borer immature stages/100 stems (13 m^?2) by the flowering stage. Borer activity continued at about the same level as the water receded, to reach maximum annual levels of 38–44% damaged stems (35 m^?2) at the late-ripening stage. At harvest, 60% of the fields were at outbreak level (>40% damaged stems). Such high levels of damage are explained by the long growth period of deepwater rice, favourable weather during the flooding period, and the optimum habitat of the elongated stem. S. incertulas populations then crashed to low levels; the larvae entering diapause in the field stubble. Although related to actual damage, the deadheart and whitehead symptoms grossly under-estimated the extent of stem damage.